Industrial Motors: Changxian New Material insulating varnish covers thermal classes B to C, with low-emission, high-thermal-conductivity solventless systems and dedicated VPI resins for medium and large high-voltage motors — providing your motor windings with reliable insulation and mechanical fixation.

Transformers: Changxian New Material insulating varnish covers thermal classes B to H — Class F solventless grades cure fast with high bond strength to reduce electromagnetic vibration and noise, while Class H grades are refrigerant resistant and suit both vacuum and atmospheric impregnation, for the impregnation insulation of EI-35 to EI-105 transformers, dry-type power transformers and reactors.

EV Motors: Changxian New Material insulating varnish provides Class H and above impregnation insulation for EV traction motors — the solventless E57-89H offers zero VOC and thermal conductivity ≥0.4 W/(m·K) to help dissipate heat and lower motor temperature rise, E57-180 withstands -40°C to 180°C thermal cycling, and refrigerant-resistant grades fit electric compressors and other refrigeration duty.

Electronic Components: Changxian air-drying insulating varnish provides fast, room-temperature protection for PCBs, inductor coils and small electronic parts — E962 is touch-dry in 10–15 minutes at 25°C, does not block soldering, delivers dielectric strength ≥30 kV/mm and is covered by a UL certification file, while E962-788 offers a benzene-free eco formulation with electric strength ≥60 kV/mm, fitting computer parts and high-frequency transformers.

Electronic Components: Changxian New Material conformal coating protects your PCBs and electronic assemblies against moisture, dust, mold, salt spray and sulfurization — acrylic systems dry fast to a transparent film with fluorescent tracer for easy inspection, polyurethane systems withstand harsher chemical and salt-spray environments, and UV/moisture dual-cure systems cure in seconds for automated lines, covering protection needs from consumer electronics to industrial controls.

Metal Surface Protection: Changxian New Material conformal coating forms a dense, transparent film over metal surfaces, contacts and connectors on your assemblies, blocking moisture, salt spray and sulfur-bearing gases to prevent corrosion, oxidation and sulfurization tarnish. Available in acrylic, polyurethane and UV-curing systems for brushing, dipping and spraying processes — giving exposed metal parts the same reliable protection as the PCB itself.

UV Fast-Curing Applications: Changxian New Material UV-curing products bring second-level curing to your automated lines — the UV conformal coating uses a UV/moisture dual-cure system that films over in seconds in exposed areas, with moisture cure completing shadowed areas, while the UV adhesive cures in 5–10 seconds under UV LED with excellent thixotropy and no post-dispensing flow. Both are solvent-free systems, helping you shorten cycle times, free up oven capacity and cut VOC emissions.

Electronic Components: Changxian New Material UV adhesive provides second-level curing for bonding and fixing your electronic assemblies — one-component, curing in 5–10 seconds under UV LED, with excellent thixotropy that keeps the bead in place after dispensing. Ideal for electronic component fixation, wire-harness reinforcement, and bonding and sealing of plastics and metals, it forms a tough, impact- and vibration-resistant bond layer and fits automated dispensing lines.

Optical Components: Changxian New Material UV adhesive cures to a transparent bond layer with a refractive index of 1.48 and water absorption below 4% (100°C, 2 h), curing in just 5–10 seconds under UV LED — well suited for bonding and fixing lenses and optical plastic parts on light-transmitting substrates such as PC. One-component with excellent thixotropy, it holds precise dispensing positions without flow. Since UV curing depends on substrate light transmission, we recommend validating transmission and cure on your real parts before adoption — our engineers can help confirm the process parameters.

Temporary Protective Coating: Changxian New Material peelable temporary protective coating provides selective masking in wave soldering, reflow soldering and conformal coating processes, protecting gold fingers, contacts, connectors, pins and test points that must stay free of solder or coating. The coating cures fast, dispenses with good thixotropy and no flow, peels off cleanly by hand in one piece after processing with no residue, and does not corrode copper, gold or silver surfaces — helping you replace manual taping and improve line efficiency.

Here, we regularly share technical articles, selection guides, and practical application insights on insulating varnishes, conformal coatings, UV conformal coatings, and UV adhesives — helping you understand material properties and fine-tune your processes. If there is a topic you would like to explore further, you are always welcome to reach out — our engineers are glad to discuss it with you.

Here, we regularly share technical articles, selection guides, and practical application insights on insulating varnishes, conformal coatings, UV conformal coatings, and UV adhesives — helping you understand material properties and fine-tune your processes. If there is a topic you would like to explore further, you are always welcome to reach out — our engineers are glad to discuss it with you.